The Rossignol Crank Boa H3 snowboard boots are a fantastic choice for intermediate and advanced riders who are looking for a strong blend of fit and performance. Snowboard boots are quite possibly the most important piece of the gear, as they're the first and only part of the setup that actually touches your body. As a result, the amount of energy required to make the board move comes directly from the energy that you put into the boot. This makes the fit and performance of the boot to be a critical method of transferring that power from your leg and foot to the edges of the board. Some nice things that make the Rossignol Crank Boa H3 snowboard boots stand out from the competition are that Boa system and the heat-moldable liner. While most liners will conform to your foot over time, an experienced boot fitter can expedite the process with a special oven and some good old-fashioned hard work. Once that liner is molded to your foot and ankle, it makes the transfer of energy a lot smoother and seamless, allowing you to really push forward into your boot to get the best possible performance. The Boa system is built to make the adjustability of the boot on the top-end of the models, and the Crank loves to be dialed in to customize that fit to you. With an easy recoil, the lifting of the lever makes the boot instantly loosen up for increased comfort, both on and off the hill.
- Weight: 1030 g per Boot
- Flex: 5/10
- H3 Boa with Recoil
- Thermo-Moldable Liner
- Articulated Cuff
- Ability Level: Intermediate and Advanced Riders
|
Basic Ski Tune: $49.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
|
Basic Board Tune: $59.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
(NO BINDING REMOVAL)
|
Performance Ski Tune: $99.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing. |
|
Ultimate PTEX Repair Tune: $124.95 Includes: Performance Tune + Unlimited PTEX repair. (DOES NOT INCLUDE BASE WELDS) |
Performance Board Tune: $129.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing (WITH binding removal). |
Race Ski Tune: $129.95 Includes: Flat base grind, deep patterned structure, custom base and side edge angles, up to 3" of PTEX repair, buff wax & brushing. |
Extras: Hand wax $30. Base Weld & Epox Repair billed at 1/4 hour $25. Our hourly rate is $100.
See the Montana tuner in action:
Looking or Bike Service as well, head over to our Bike service options.
1. Can I pick this item up at the Philbrick’s store?
Yes. All products can be ordered online and picked up at our Dover, NH store. Choose Local Pickup during checkout and we’ll notify you when your order is ready.
2. Do you assemble bikes purchased online?
Yes. Bikes purchased through Philbrick’s can be professionally assembled by our in-store technicians so they’re ready to ride when you pick them up.
3. Can I get help choosing the right size or model?
Absolutely. Our staff are experienced riders and can help you choose the correct size, fit, and model. Feel free to call or stop by the store for personalized guidance.
4. Do you offer bike fitting services?
Yes. We offer professional bike fitting services to help ensure comfort, performance, and injury prevention.
5. Can you service equipment purchased from your website?
Yes. Our service department can tune, repair, and maintain bikes and gear purchased from Philbrick’s.
6. How long does local pickup take?
Most orders are ready within 1–2 business days, depending on assembly or service requirements. We’ll email you as soon as your order is ready.
7. Can I return or exchange items at the store?
Yes. Online purchases from Philbrick’s can be returned or exchanged at our Dover, NH location in accordance with our return policy.
8. Do you carry products in the store that aren’t listed online?
No, all products are listed online.
9. Can I speak with someone before placing an order?
Of course. Our team is happy to answer questions about products, sizing, compatibility, or availability before you purchase. Call the store at your convenience. 603-742-9333
10. Where is Philbrick’s located?
Philbrick’s is located in Dover, New Hampshire, serving riders throughout the Seacoast region including Portsmouth, Hampton, and surrounding communities.
The Rossignol Crank Boa H3 snowboard boots are a fantastic choice for intermediate and advanced riders who are looking for a strong blend of fit and performance. Snowboard boots are quite possibly the most important piece of the gear, as they're the first and only part of the setup that actually touches your body. As a result, the amount of energy required to make the board move comes directly from the energy that you put into the boot. This makes the fit and performance of the boot to be a critical method of transferring that power from your leg and foot to the edges of the board. Some nice things that make the Rossignol Crank Boa H3 snowboard boots stand out from the competition are that Boa system and the heat-moldable liner. While most liners will conform to your foot over time, an experienced boot fitter can expedite the process with a special oven and some good old-fashioned hard work. Once that liner is molded to your foot and ankle, it makes the transfer of energy a lot smoother and seamless, allowing you to really push forward into your boot to get the best possible performance. The Boa system is built to make the adjustability of the boot on the top-end of the models, and the Crank loves to be dialed in to customize that fit to you. With an easy recoil, the lifting of the lever makes the boot instantly loosen up for increased comfort, both on and off the hill.
- Weight: 1030 g per Boot
- Flex: 5/10
- H3 Boa with Recoil
- Thermo-Moldable Liner
- Articulated Cuff
- Ability Level: Intermediate and Advanced Riders
|
Basic Ski Tune: $49.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
|
Basic Board Tune: $59.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
(NO BINDING REMOVAL)
|
Performance Ski Tune: $99.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing. |
|
Ultimate PTEX Repair Tune: $124.95 Includes: Performance Tune + Unlimited PTEX repair. (DOES NOT INCLUDE BASE WELDS) |
Performance Board Tune: $129.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing (WITH binding removal). |
Race Ski Tune: $129.95 Includes: Flat base grind, deep patterned structure, custom base and side edge angles, up to 3" of PTEX repair, buff wax & brushing. |
Extras: Hand wax $30. Base Weld & Epox Repair billed at 1/4 hour $25. Our hourly rate is $100.
See the Montana tuner in action:
Looking or Bike Service as well, head over to our Bike service options.
1. Can I pick this item up at the Philbrick’s store?
Yes. All products can be ordered online and picked up at our Dover, NH store. Choose Local Pickup during checkout and we’ll notify you when your order is ready.
2. Do you assemble bikes purchased online?
Yes. Bikes purchased through Philbrick’s can be professionally assembled by our in-store technicians so they’re ready to ride when you pick them up.
3. Can I get help choosing the right size or model?
Absolutely. Our staff are experienced riders and can help you choose the correct size, fit, and model. Feel free to call or stop by the store for personalized guidance.
4. Do you offer bike fitting services?
Yes. We offer professional bike fitting services to help ensure comfort, performance, and injury prevention.
5. Can you service equipment purchased from your website?
Yes. Our service department can tune, repair, and maintain bikes and gear purchased from Philbrick’s.
6. How long does local pickup take?
Most orders are ready within 1–2 business days, depending on assembly or service requirements. We’ll email you as soon as your order is ready.
7. Can I return or exchange items at the store?
Yes. Online purchases from Philbrick’s can be returned or exchanged at our Dover, NH location in accordance with our return policy.
8. Do you carry products in the store that aren’t listed online?
No, all products are listed online.
9. Can I speak with someone before placing an order?
Of course. Our team is happy to answer questions about products, sizing, compatibility, or availability before you purchase. Call the store at your convenience. 603-742-9333
10. Where is Philbrick’s located?
Philbrick’s is located in Dover, New Hampshire, serving riders throughout the Seacoast region including Portsmouth, Hampton, and surrounding communities.