Epro™ 1000 is NiteRider’s first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes—Steady ON and Pulse Flash—with Built-in Mode Memory (remembers last setting).
Emax+™ 150 is NiteRider’s first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes—Steady ON and varying flashes—with Built-in Mode Memory (remembers last setting).
EPRO™ 1000 FEATURES
- Lumen Output: 1000
- 2 Modes
- Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts
- Water / Dust Resistant IP64 Rated
- Weight: 166 grams
- Fits 22mm-31.8mm seat posts
- Includes a pre-wired Epro™ 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims
LIGHT MODES
- 1) Steady ON
- 2) Pulse Flash
Emax+™ 150 FEATURES
- Lumen Output: 150
- 6 Modes
- Hardwired, Voltage 6 to 80 Volts DC
- Water / Dust Resistant IP64 Rated
- Weight: 75 grams
- Fits 22mm-34.9mm seat posts
- Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount
Emax+™ 150 LIGHT MODES
- 1) Fast Flash
- 2) Slow Flash
- 3) Disco Flash
- 4) Pulse Flash
- 5) High Steady
- 6) Low Steady
|
Basic Ski Tune: $49.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
|
Basic Board Tune: $59.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
(NO BINDING REMOVAL)
|
Performance Ski Tune: $99.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing. |
|
Ultimate PTEX Repair Tune: $124.95 Includes: Performance Tune + Unlimited PTEX repair. (DOES NOT INCLUDE BASE WELDS) |
Performance Board Tune: $129.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing (WITH binding removal). |
Race Ski Tune: $129.95 Includes: Flat base grind, deep patterned structure, custom base and side edge angles, up to 3" of PTEX repair, buff wax & brushing. |
Extras: Hand wax $30. Base Weld & Epox Repair billed at 1/4 hour $25. Our hourly rate is $100.
See the Montana tuner in action:
Looking or Bike Service as well, head over to our Bike service options.
1. Can I pick this item up at the Philbrick’s store?
Yes. All products can be ordered online and picked up at our Dover, NH store. Choose Local Pickup during checkout and we’ll notify you when your order is ready.
2. Do you assemble bikes purchased online?
Yes. Bikes purchased through Philbrick’s can be professionally assembled by our in-store technicians so they’re ready to ride when you pick them up.
3. Can I get help choosing the right size or model?
Absolutely. Our staff are experienced riders and can help you choose the correct size, fit, and model. Feel free to call or stop by the store for personalized guidance.
4. Do you offer bike fitting services?
Yes. We offer professional bike fitting services to help ensure comfort, performance, and injury prevention.
5. Can you service equipment purchased from your website?
Yes. Our service department can tune, repair, and maintain bikes and gear purchased from Philbrick’s.
6. How long does local pickup take?
Most orders are ready within 1–2 business days, depending on assembly or service requirements. We’ll email you as soon as your order is ready.
7. Can I return or exchange items at the store?
Yes. Online purchases from Philbrick’s can be returned or exchanged at our Dover, NH location in accordance with our return policy.
8. Do you carry products in the store that aren’t listed online?
No, all products are listed online.
9. Can I speak with someone before placing an order?
Of course. Our team is happy to answer questions about products, sizing, compatibility, or availability before you purchase. Call the store at your convenience. 603-742-9333
10. Where is Philbrick’s located?
Philbrick’s is located in Dover, New Hampshire, serving riders throughout the Seacoast region including Portsmouth, Hampton, and surrounding communities.
Epro™ 1000 is NiteRider’s first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes—Steady ON and Pulse Flash—with Built-in Mode Memory (remembers last setting).
Emax+™ 150 is NiteRider’s first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike’s battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes—Steady ON and varying flashes—with Built-in Mode Memory (remembers last setting).
EPRO™ 1000 FEATURES
- Lumen Output: 1000
- 2 Modes
- Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts
- Water / Dust Resistant IP64 Rated
- Weight: 166 grams
- Fits 22mm-31.8mm seat posts
- Includes a pre-wired Epro™ 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims
LIGHT MODES
- 1) Steady ON
- 2) Pulse Flash
Emax+™ 150 FEATURES
- Lumen Output: 150
- 6 Modes
- Hardwired, Voltage 6 to 80 Volts DC
- Water / Dust Resistant IP64 Rated
- Weight: 75 grams
- Fits 22mm-34.9mm seat posts
- Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount
Emax+™ 150 LIGHT MODES
- 1) Fast Flash
- 2) Slow Flash
- 3) Disco Flash
- 4) Pulse Flash
- 5) High Steady
- 6) Low Steady
|
Basic Ski Tune: $49.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
|
Basic Board Tune: $59.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
(NO BINDING REMOVAL)
|
Performance Ski Tune: $99.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing. |
|
Ultimate PTEX Repair Tune: $124.95 Includes: Performance Tune + Unlimited PTEX repair. (DOES NOT INCLUDE BASE WELDS) |
Performance Board Tune: $129.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing (WITH binding removal). |
Race Ski Tune: $129.95 Includes: Flat base grind, deep patterned structure, custom base and side edge angles, up to 3" of PTEX repair, buff wax & brushing. |
Extras: Hand wax $30. Base Weld & Epox Repair billed at 1/4 hour $25. Our hourly rate is $100.
See the Montana tuner in action:
Looking or Bike Service as well, head over to our Bike service options.
1. Can I pick this item up at the Philbrick’s store?
Yes. All products can be ordered online and picked up at our Dover, NH store. Choose Local Pickup during checkout and we’ll notify you when your order is ready.
2. Do you assemble bikes purchased online?
Yes. Bikes purchased through Philbrick’s can be professionally assembled by our in-store technicians so they’re ready to ride when you pick them up.
3. Can I get help choosing the right size or model?
Absolutely. Our staff are experienced riders and can help you choose the correct size, fit, and model. Feel free to call or stop by the store for personalized guidance.
4. Do you offer bike fitting services?
Yes. We offer professional bike fitting services to help ensure comfort, performance, and injury prevention.
5. Can you service equipment purchased from your website?
Yes. Our service department can tune, repair, and maintain bikes and gear purchased from Philbrick’s.
6. How long does local pickup take?
Most orders are ready within 1–2 business days, depending on assembly or service requirements. We’ll email you as soon as your order is ready.
7. Can I return or exchange items at the store?
Yes. Online purchases from Philbrick’s can be returned or exchanged at our Dover, NH location in accordance with our return policy.
8. Do you carry products in the store that aren’t listed online?
No, all products are listed online.
9. Can I speak with someone before placing an order?
Of course. Our team is happy to answer questions about products, sizing, compatibility, or availability before you purchase. Call the store at your convenience. 603-742-9333
10. Where is Philbrick’s located?
Philbrick’s is located in Dover, New Hampshire, serving riders throughout the Seacoast region including Portsmouth, Hampton, and surrounding communities.