The Bent Metal Transfer Snowboard Bindings bring a medium-stiff, Drive Plate–powered feel that leans into precise carving and committed turns without turning every run into a leg-burning negotiation. They stay composed when you’re opening it up on groomers, then loosen just enough to keep things fun when you drift into chopped-up snow or start hunting side hits that looked smaller from the lift. Equal parts control and give, they ride like they’ve already decided where your next turn is going to land.
- Flex - Flex Rating: 8 (1 Soft - 10 Stiff)
- Baseplate - Two Piece Chassis / Mini Pivot Disk: The two-piece polymer-and-aluminum design delivers a precise ride. An adjustable aluminum heel cup helps center the toe and heel. The reduced-size Mini Pivot Disk increases the true board flex zone and drive plate power. Canted footbed / Heelshock Pad: Canted 3° footbed padding centers riders balance while increasing drive and pop. Heel Shock Pad provides extra absorption from hard landings. Magnesium Fiber Drive Plate: 7/10
- Highback - Power Polymer Nylon Highback: 7/10 Flex. Seamless power transfer. Solid highback for traditionalists.
- Straps - Dual Band Ankle Strap Medium: The Medium Flex Power Band features a mid-range surface area that delivers supportive response and comfort across the widest range of riding conditions.
- Buckles - Forged Aluminum Buckles: Lightweight with smooth entry and release. Hardened for ultimate strength.
- Additional Features - The Cube: This forward lean adjuster is made with a dual durometer urethane, offering the fastest and easiest adjustments out there. A simple twist chooses from four different angles: 10, 14, 18, and 22 degrees.
- Binding Mount Pattern - 2x4, Channel
- Ability Level - Advanced-Expert
- Flex Rating - Stiff
- Binding Style - Strap
|
Basic Ski Tune: $49.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
|
Basic Board Tune: $59.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
(NO BINDING REMOVAL)
|
Performance Ski Tune: $99.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing. |
|
Ultimate PTEX Repair Tune: $124.95 Includes: Performance Tune + Unlimited PTEX repair. (DOES NOT INCLUDE BASE WELDS) |
Performance Board Tune: $129.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing (WITH binding removal). |
Race Ski Tune: $129.95 Includes: Flat base grind, deep patterned structure, custom base and side edge angles, up to 3" of PTEX repair, buff wax & brushing. |
Extras: Hand wax $30. Base Weld & Epox Repair billed at 1/4 hour $25. Our hourly rate is $100.
See the Montana tuner in action:
Looking or Bike Service as well, head over to our Bike service options.
1. Can I pick this item up at the Philbrick’s store?
Yes. All products can be ordered online and picked up at our Dover, NH store. Choose Local Pickup during checkout and we’ll notify you when your order is ready.
2. Do you assemble bikes purchased online?
Yes. Bikes purchased through Philbrick’s can be professionally assembled by our in-store technicians so they’re ready to ride when you pick them up.
3. Can I get help choosing the right size or model?
Absolutely. Our staff are experienced riders and can help you choose the correct size, fit, and model. Feel free to call or stop by the store for personalized guidance.
4. Do you offer bike fitting services?
Yes. We offer professional bike fitting services to help ensure comfort, performance, and injury prevention.
5. Can you service equipment purchased from your website?
Yes. Our service department can tune, repair, and maintain bikes and gear purchased from Philbrick’s.
6. How long does local pickup take?
Most orders are ready within 1–2 business days, depending on assembly or service requirements. We’ll email you as soon as your order is ready.
7. Can I return or exchange items at the store?
Yes. Online purchases from Philbrick’s can be returned or exchanged at our Dover, NH location in accordance with our return policy.
8. Do you carry products in the store that aren’t listed online?
No, all products are listed online.
9. Can I speak with someone before placing an order?
Of course. Our team is happy to answer questions about products, sizing, compatibility, or availability before you purchase. Call the store at your convenience. 603-742-9333
10. Where is Philbrick’s located?
Philbrick’s is located in Dover, New Hampshire, serving riders throughout the Seacoast region including Portsmouth, Hampton, and surrounding communities.
The Bent Metal Transfer Snowboard Bindings bring a medium-stiff, Drive Plate–powered feel that leans into precise carving and committed turns without turning every run into a leg-burning negotiation. They stay composed when you’re opening it up on groomers, then loosen just enough to keep things fun when you drift into chopped-up snow or start hunting side hits that looked smaller from the lift. Equal parts control and give, they ride like they’ve already decided where your next turn is going to land.
- Flex - Flex Rating: 8 (1 Soft - 10 Stiff)
- Baseplate - Two Piece Chassis / Mini Pivot Disk: The two-piece polymer-and-aluminum design delivers a precise ride. An adjustable aluminum heel cup helps center the toe and heel. The reduced-size Mini Pivot Disk increases the true board flex zone and drive plate power. Canted footbed / Heelshock Pad: Canted 3° footbed padding centers riders balance while increasing drive and pop. Heel Shock Pad provides extra absorption from hard landings. Magnesium Fiber Drive Plate: 7/10
- Highback - Power Polymer Nylon Highback: 7/10 Flex. Seamless power transfer. Solid highback for traditionalists.
- Straps - Dual Band Ankle Strap Medium: The Medium Flex Power Band features a mid-range surface area that delivers supportive response and comfort across the widest range of riding conditions.
- Buckles - Forged Aluminum Buckles: Lightweight with smooth entry and release. Hardened for ultimate strength.
- Additional Features - The Cube: This forward lean adjuster is made with a dual durometer urethane, offering the fastest and easiest adjustments out there. A simple twist chooses from four different angles: 10, 14, 18, and 22 degrees.
- Binding Mount Pattern - 2x4, Channel
- Ability Level - Advanced-Expert
- Flex Rating - Stiff
- Binding Style - Strap
|
Basic Ski Tune: $49.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
|
Basic Board Tune: $59.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
(NO BINDING REMOVAL)
|
Performance Ski Tune: $99.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing. |
|
Ultimate PTEX Repair Tune: $124.95 Includes: Performance Tune + Unlimited PTEX repair. (DOES NOT INCLUDE BASE WELDS) |
Performance Board Tune: $129.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing (WITH binding removal). |
Race Ski Tune: $129.95 Includes: Flat base grind, deep patterned structure, custom base and side edge angles, up to 3" of PTEX repair, buff wax & brushing. |
Extras: Hand wax $30. Base Weld & Epox Repair billed at 1/4 hour $25. Our hourly rate is $100.
See the Montana tuner in action:
Looking or Bike Service as well, head over to our Bike service options.
1. Can I pick this item up at the Philbrick’s store?
Yes. All products can be ordered online and picked up at our Dover, NH store. Choose Local Pickup during checkout and we’ll notify you when your order is ready.
2. Do you assemble bikes purchased online?
Yes. Bikes purchased through Philbrick’s can be professionally assembled by our in-store technicians so they’re ready to ride when you pick them up.
3. Can I get help choosing the right size or model?
Absolutely. Our staff are experienced riders and can help you choose the correct size, fit, and model. Feel free to call or stop by the store for personalized guidance.
4. Do you offer bike fitting services?
Yes. We offer professional bike fitting services to help ensure comfort, performance, and injury prevention.
5. Can you service equipment purchased from your website?
Yes. Our service department can tune, repair, and maintain bikes and gear purchased from Philbrick’s.
6. How long does local pickup take?
Most orders are ready within 1–2 business days, depending on assembly or service requirements. We’ll email you as soon as your order is ready.
7. Can I return or exchange items at the store?
Yes. Online purchases from Philbrick’s can be returned or exchanged at our Dover, NH location in accordance with our return policy.
8. Do you carry products in the store that aren’t listed online?
No, all products are listed online.
9. Can I speak with someone before placing an order?
Of course. Our team is happy to answer questions about products, sizing, compatibility, or availability before you purchase. Call the store at your convenience. 603-742-9333
10. Where is Philbrick’s located?
Philbrick’s is located in Dover, New Hampshire, serving riders throughout the Seacoast region including Portsmouth, Hampton, and surrounding communities.