A dual-suspension e-mountain bike built to crush boundaries. With its intuitive handling & the power and range of the Bosch 750Wh system, nothing is out of reach.
Specifications:
- Frame - Moterra Carbon Front Triangle, SmartForm C1 Alloy Swingarm, 150mm travel, Proportional Response Tuned Suspension, removable downtube battery, alloy skid plate, 55mm chainline, internal cable routing, 148x12mm thru-axle, UDH hanger, post mount brake, 1.5” – 1.8” tapered headtube, 18mm two-bolt kickstand mount
- Fork - RockShox Lyrik Select, 150mm, DebonAir, 15x110mm thru-axle, tapered steered, 44mm offset
- Headset - Acros integrated sealed bearing, tapered
- Rear Shock - RockShox Deluxe Select+, DebonAir, 2-Pos mode adjust, adjustable rebound
- Drive Unit - Bosch Performance Line CX 250W
- Battery - Bosch PowerTube, 750Wh
- Charger - Bosch 4A
- Display - Bosch Kiox 300 w/ LED remote
- Certifications - UL 2849
- Rear Derailleur - Shimano XT
- Shifters - Shimano SLX, 12-speed
- Chain - Shimano SLX, 12-speed
- Crank - FSA Bosch E-bike w/ 55mm chainline, 160mm, 34T
- Rear Cogs - Shimano SLX, 10-51, 12-speed
- Brakes - Shimano MT520 4-piston hydraulic disc, 203/203mm RT64 rotors
- Brake Levers - Shimano MT501 hydraulic disc
- Rims - WTB ST i30 TCS, 32h, tubeless ready
- Spokes - DT Swiss Champion
- Tire Size - 2.6
- Wheel Size - 29
- Hubs - (F) Formula 15x110mm thru-axle / (R) Shimano MT410, 12x148mm thru-axle
- Tires - (F) Maxxis Minion DHF, 29x2.6", EXO, tubeless ready / (R) Maxxis Rekon, 29x2.6" (27.5x2.6" - size Small), EXO, tubeless ready
- Front Tire - Maxxis Minion DHF, 29x2.6", EXO, tubeless ready
- Rear Tire - Maxxis Rekon, 29x2.6" (27.5x2.6" - size Small), EXO, tubeless ready
- Handlebar - Cannondale 3 Riser, 6061 Alloy, 25mm rise, 8° sweep, 5° rise, 800mm
- Stem - Cannondale 2, 6061 Alloy, 35mm, 0°
- Grips - Fabric FunGuy
- Saddle - Fabric Scoop Shallow Sport, steel rails
- Seatpost - Cannondale DownLow Dropper, internal routing, 31.6, 125mm (S), 150mm (M), 170mm (L-XL)
- Extra - Pre-installed light cable. (Note: this model is not compatible with Bosch Range Extender)
*Specifications are subject to change without notice
|
Basic Ski Tune: $49.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
|
Basic Board Tune: $59.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
(NO BINDING REMOVAL)
|
Performance Ski Tune: $99.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing. |
|
Ultimate PTEX Repair Tune: $124.95 Includes: Performance Tune + Unlimited PTEX repair. (DOES NOT INCLUDE BASE WELDS) |
Performance Board Tune: $129.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing (WITH binding removal). |
Race Ski Tune: $129.95 Includes: Flat base grind, deep patterned structure, custom base and side edge angles, up to 3" of PTEX repair, buff wax & brushing. |
Extras: Hand wax $30. Base Weld & Epox Repair billed at 1/4 hour $25. Our hourly rate is $100.
See the Montana tuner in action:
Looking or Bike Service as well, head over to our Bike service options.
1. Can I pick this item up at the Philbrick’s store?
Yes. All products can be ordered online and picked up at our Dover, NH store. Choose Local Pickup during checkout and we’ll notify you when your order is ready.
2. Do you assemble bikes purchased online?
Yes. Bikes purchased through Philbrick’s can be professionally assembled by our in-store technicians so they’re ready to ride when you pick them up.
3. Can I get help choosing the right size or model?
Absolutely. Our staff are experienced riders and can help you choose the correct size, fit, and model. Feel free to call or stop by the store for personalized guidance.
4. Do you offer bike fitting services?
Yes. We offer professional bike fitting services to help ensure comfort, performance, and injury prevention.
5. Can you service equipment purchased from your website?
Yes. Our service department can tune, repair, and maintain bikes and gear purchased from Philbrick’s.
6. How long does local pickup take?
Most orders are ready within 1–2 business days, depending on assembly or service requirements. We’ll email you as soon as your order is ready.
7. Can I return or exchange items at the store?
Yes. Online purchases from Philbrick’s can be returned or exchanged at our Dover, NH location in accordance with our return policy.
8. Do you carry products in the store that aren’t listed online?
No, all products are listed online.
9. Can I speak with someone before placing an order?
Of course. Our team is happy to answer questions about products, sizing, compatibility, or availability before you purchase. Call the store at your convenience. 603-742-9333
10. Where is Philbrick’s located?
Philbrick’s is located in Dover, New Hampshire, serving riders throughout the Seacoast region including Portsmouth, Hampton, and surrounding communities.
A dual-suspension e-mountain bike built to crush boundaries. With its intuitive handling & the power and range of the Bosch 750Wh system, nothing is out of reach.
Specifications:
- Frame - Moterra Carbon Front Triangle, SmartForm C1 Alloy Swingarm, 150mm travel, Proportional Response Tuned Suspension, removable downtube battery, alloy skid plate, 55mm chainline, internal cable routing, 148x12mm thru-axle, UDH hanger, post mount brake, 1.5” – 1.8” tapered headtube, 18mm two-bolt kickstand mount
- Fork - RockShox Lyrik Select, 150mm, DebonAir, 15x110mm thru-axle, tapered steered, 44mm offset
- Headset - Acros integrated sealed bearing, tapered
- Rear Shock - RockShox Deluxe Select+, DebonAir, 2-Pos mode adjust, adjustable rebound
- Drive Unit - Bosch Performance Line CX 250W
- Battery - Bosch PowerTube, 750Wh
- Charger - Bosch 4A
- Display - Bosch Kiox 300 w/ LED remote
- Certifications - UL 2849
- Rear Derailleur - Shimano XT
- Shifters - Shimano SLX, 12-speed
- Chain - Shimano SLX, 12-speed
- Crank - FSA Bosch E-bike w/ 55mm chainline, 160mm, 34T
- Rear Cogs - Shimano SLX, 10-51, 12-speed
- Brakes - Shimano MT520 4-piston hydraulic disc, 203/203mm RT64 rotors
- Brake Levers - Shimano MT501 hydraulic disc
- Rims - WTB ST i30 TCS, 32h, tubeless ready
- Spokes - DT Swiss Champion
- Tire Size - 2.6
- Wheel Size - 29
- Hubs - (F) Formula 15x110mm thru-axle / (R) Shimano MT410, 12x148mm thru-axle
- Tires - (F) Maxxis Minion DHF, 29x2.6", EXO, tubeless ready / (R) Maxxis Rekon, 29x2.6" (27.5x2.6" - size Small), EXO, tubeless ready
- Front Tire - Maxxis Minion DHF, 29x2.6", EXO, tubeless ready
- Rear Tire - Maxxis Rekon, 29x2.6" (27.5x2.6" - size Small), EXO, tubeless ready
- Handlebar - Cannondale 3 Riser, 6061 Alloy, 25mm rise, 8° sweep, 5° rise, 800mm
- Stem - Cannondale 2, 6061 Alloy, 35mm, 0°
- Grips - Fabric FunGuy
- Saddle - Fabric Scoop Shallow Sport, steel rails
- Seatpost - Cannondale DownLow Dropper, internal routing, 31.6, 125mm (S), 150mm (M), 170mm (L-XL)
- Extra - Pre-installed light cable. (Note: this model is not compatible with Bosch Range Extender)
*Specifications are subject to change without notice
|
Basic Ski Tune: $49.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
|
Basic Board Tune: $59.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
(NO BINDING REMOVAL)
|
Performance Ski Tune: $99.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing. |
|
Ultimate PTEX Repair Tune: $124.95 Includes: Performance Tune + Unlimited PTEX repair. (DOES NOT INCLUDE BASE WELDS) |
Performance Board Tune: $129.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing (WITH binding removal). |
Race Ski Tune: $129.95 Includes: Flat base grind, deep patterned structure, custom base and side edge angles, up to 3" of PTEX repair, buff wax & brushing. |
Extras: Hand wax $30. Base Weld & Epox Repair billed at 1/4 hour $25. Our hourly rate is $100.
See the Montana tuner in action:
Looking or Bike Service as well, head over to our Bike service options.
1. Can I pick this item up at the Philbrick’s store?
Yes. All products can be ordered online and picked up at our Dover, NH store. Choose Local Pickup during checkout and we’ll notify you when your order is ready.
2. Do you assemble bikes purchased online?
Yes. Bikes purchased through Philbrick’s can be professionally assembled by our in-store technicians so they’re ready to ride when you pick them up.
3. Can I get help choosing the right size or model?
Absolutely. Our staff are experienced riders and can help you choose the correct size, fit, and model. Feel free to call or stop by the store for personalized guidance.
4. Do you offer bike fitting services?
Yes. We offer professional bike fitting services to help ensure comfort, performance, and injury prevention.
5. Can you service equipment purchased from your website?
Yes. Our service department can tune, repair, and maintain bikes and gear purchased from Philbrick’s.
6. How long does local pickup take?
Most orders are ready within 1–2 business days, depending on assembly or service requirements. We’ll email you as soon as your order is ready.
7. Can I return or exchange items at the store?
Yes. Online purchases from Philbrick’s can be returned or exchanged at our Dover, NH location in accordance with our return policy.
8. Do you carry products in the store that aren’t listed online?
No, all products are listed online.
9. Can I speak with someone before placing an order?
Of course. Our team is happy to answer questions about products, sizing, compatibility, or availability before you purchase. Call the store at your convenience. 603-742-9333
10. Where is Philbrick’s located?
Philbrick’s is located in Dover, New Hampshire, serving riders throughout the Seacoast region including Portsmouth, Hampton, and surrounding communities.