We understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that’s why we created the Mako™ Series. The Mako™ line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako™ line is easy on the wallet and easy to operate.
For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb™ 100 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb™ 100 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles.To further rider safety and visibility, the CherryBomb™ 100 employs a custom made, built in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options.
MAKO™ 250
- Low cost, high powered light
- Highly visible in traffic = keeps you safe
- Run Time: 7:00 - 28:00 hours*
- 3 light settings – High, Low and flash
- Tough durable design
- Water / Dust Resistant IP64 Rated
CHERRYBOMB™ 100
- Daylight Visible Flash (DVF)
- Up to 136 hour run time*
- Visible up to 1 mile
- Internal reflector = visible if light on off mode
- Easy to operate AAA batteries
- Super bright day time flash mode
- Be Seen by cars = Be Safe
- Water / Dust Resistant IP64 Rated
*Run times are approximations and may vary
|
Basic Ski Tune: $49.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
|
Basic Board Tune: $59.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
(NO BINDING REMOVAL)
|
Performance Ski Tune: $99.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing. |
|
Ultimate PTEX Repair Tune: $124.95 Includes: Performance Tune + Unlimited PTEX repair. (DOES NOT INCLUDE BASE WELDS) |
Performance Board Tune: $129.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing (WITH binding removal). |
Race Ski Tune: $129.95 Includes: Flat base grind, deep patterned structure, custom base and side edge angles, up to 3" of PTEX repair, buff wax & brushing. |
Extras: Hand wax $30. Base Weld & Epox Repair billed at 1/4 hour $25. Our hourly rate is $100.
See the Montana tuner in action:
Looking or Bike Service as well, head over to our Bike service options.
1. Can I pick this item up at the Philbrick’s store?
Yes. All products can be ordered online and picked up at our Dover, NH store. Choose Local Pickup during checkout and we’ll notify you when your order is ready.
2. Do you assemble bikes purchased online?
Yes. Bikes purchased through Philbrick’s can be professionally assembled by our in-store technicians so they’re ready to ride when you pick them up.
3. Can I get help choosing the right size or model?
Absolutely. Our staff are experienced riders and can help you choose the correct size, fit, and model. Feel free to call or stop by the store for personalized guidance.
4. Do you offer bike fitting services?
Yes. We offer professional bike fitting services to help ensure comfort, performance, and injury prevention.
5. Can you service equipment purchased from your website?
Yes. Our service department can tune, repair, and maintain bikes and gear purchased from Philbrick’s.
6. How long does local pickup take?
Most orders are ready within 1–2 business days, depending on assembly or service requirements. We’ll email you as soon as your order is ready.
7. Can I return or exchange items at the store?
Yes. Online purchases from Philbrick’s can be returned or exchanged at our Dover, NH location in accordance with our return policy.
8. Do you carry products in the store that aren’t listed online?
No, all products are listed online.
9. Can I speak with someone before placing an order?
Of course. Our team is happy to answer questions about products, sizing, compatibility, or availability before you purchase. Call the store at your convenience. 603-742-9333
10. Where is Philbrick’s located?
Philbrick’s is located in Dover, New Hampshire, serving riders throughout the Seacoast region including Portsmouth, Hampton, and surrounding communities.
We understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that’s why we created the Mako™ Series. The Mako™ line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako™ line is easy on the wallet and easy to operate.
For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb™ 100 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb™ 100 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles.To further rider safety and visibility, the CherryBomb™ 100 employs a custom made, built in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options.
MAKO™ 250
- Low cost, high powered light
- Highly visible in traffic = keeps you safe
- Run Time: 7:00 - 28:00 hours*
- 3 light settings – High, Low and flash
- Tough durable design
- Water / Dust Resistant IP64 Rated
CHERRYBOMB™ 100
- Daylight Visible Flash (DVF)
- Up to 136 hour run time*
- Visible up to 1 mile
- Internal reflector = visible if light on off mode
- Easy to operate AAA batteries
- Super bright day time flash mode
- Be Seen by cars = Be Safe
- Water / Dust Resistant IP64 Rated
*Run times are approximations and may vary
|
Basic Ski Tune: $49.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
|
Basic Board Tune: $59.95 Includes: Base grind, base & side edge sharpening, buff wax & brushing.
(NO BINDING REMOVAL)
|
Performance Ski Tune: $99.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing. |
|
Ultimate PTEX Repair Tune: $124.95 Includes: Performance Tune + Unlimited PTEX repair. (DOES NOT INCLUDE BASE WELDS) |
Performance Board Tune: $129.95 Includes: Base grind & stone grind, up to 3" of PTEX repair, base & side edge sharpening, buff wax & brushing (WITH binding removal). |
Race Ski Tune: $129.95 Includes: Flat base grind, deep patterned structure, custom base and side edge angles, up to 3" of PTEX repair, buff wax & brushing. |
Extras: Hand wax $30. Base Weld & Epox Repair billed at 1/4 hour $25. Our hourly rate is $100.
See the Montana tuner in action:
Looking or Bike Service as well, head over to our Bike service options.
1. Can I pick this item up at the Philbrick’s store?
Yes. All products can be ordered online and picked up at our Dover, NH store. Choose Local Pickup during checkout and we’ll notify you when your order is ready.
2. Do you assemble bikes purchased online?
Yes. Bikes purchased through Philbrick’s can be professionally assembled by our in-store technicians so they’re ready to ride when you pick them up.
3. Can I get help choosing the right size or model?
Absolutely. Our staff are experienced riders and can help you choose the correct size, fit, and model. Feel free to call or stop by the store for personalized guidance.
4. Do you offer bike fitting services?
Yes. We offer professional bike fitting services to help ensure comfort, performance, and injury prevention.
5. Can you service equipment purchased from your website?
Yes. Our service department can tune, repair, and maintain bikes and gear purchased from Philbrick’s.
6. How long does local pickup take?
Most orders are ready within 1–2 business days, depending on assembly or service requirements. We’ll email you as soon as your order is ready.
7. Can I return or exchange items at the store?
Yes. Online purchases from Philbrick’s can be returned or exchanged at our Dover, NH location in accordance with our return policy.
8. Do you carry products in the store that aren’t listed online?
No, all products are listed online.
9. Can I speak with someone before placing an order?
Of course. Our team is happy to answer questions about products, sizing, compatibility, or availability before you purchase. Call the store at your convenience. 603-742-9333
10. Where is Philbrick’s located?
Philbrick’s is located in Dover, New Hampshire, serving riders throughout the Seacoast region including Portsmouth, Hampton, and surrounding communities.