Specialized Stumpjumper EVO Expert T-Type Mountain Bike 2024

Total control, unparalleled bump-eating suspension, and a fine-tunable geometry are hallmarks of the all-new Stumpjumper EVO Expert. Top it off with a build that blends quality, affordability, and durability, and it’s the perfect trail partner, no matter where those trails are, or how rowdy they get.

What do you get when you pair a 29-inch front wheel with a 27.5-inch rear wheel? The Stumpjumper EVO Expert, that’s what. With all of the traction and handling benefits of a 29er, but with a smaller, more maneuverable rear wheel, this mullet setup suits a more jibby, playful style. It’s right at home at the bike park, and is a total blast to cut loose with on the trail.

All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.

The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other.

Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.

We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant.

*Specifications:

• Fork  -  FOX FLOAT 36 Performance Elite, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel
• Rear Shock  -  FOX FLOAT X2 Performance Elite, Rx Trail Tune, 2-position open/firm lever, HSC, LSC, HSR, and LSR adjustment, S1:210x50mm, S2-S6:210x55mm
• Stem  -  Alloy Trail Stem, 35mm bar bore
• Saddle  -  Bridge Comp, Hollow Cr-mo rails, 155/143mm
• Grips  -  Deity Lockjaw
• SeatPost  -  OneUp, Dropper Post-V2, MMX lever, 34.9 (S1:120mm, S2/S3:150mm, S4: 180mm, S5/S6: 210mm)
• Handlebars  -  Specialized Trail, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 30mm rise, 800mm, 35mm clamp
• Seat Binder  -  Alloy, 38.6mm
• Frame  -  FACT 11m carbon chassis and rear-end, asymmetrical design, 29/27.5" Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel
• Front Tire  -  Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3"
• Spokes  -  Sapim Force
• Rear Tire  -  Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, 27.5 x 2.3"
• Front Hub  -  DT Swiss 370, 28h, 15x110
• Rims  -  Roval Traverse 29 Alloy, 30mm internal width, 28h: Roval Traverse 27.5 Alloy, 30mm internal width, 32h
• Rear Hub  -  DT Swiss 370, 32h, 12x148
• Inner Tubes  -  Standard, Presta
• Shift Levers  -  SRAM AXS POD Controller
• Chain  -  SRAM GX Eagle Transmission Flattop Chain, 12spd
• Cassette  -  SRAM GX Eagle Transmission Cassette, 12spd, 10-52T
• Bottom Bracket  -  SRAM DUB WIDE, BSA 73mm, Threaded
• Crankset  -  SRAM GX Eagle, with Aluminum Guards, DUB, 32T, S1:165mm, S2-S5: 170mm, S6: 175mm
• Rear Derailleur  -  SRAM GX Eagle Transmission Derailleur
• Chainrings  -  32T
• Rear Brake  -  SRAM Code Silver Stealth, 4-piston caliper, hydraulic disc, 200mm Rotor
• Front Brake  -  SRAM Code Silver Stealth, 4-piston caliper, hydraulic disc, 200mm Rotor

* Specifications are subject to change without notice

Extras: Hand wax $30. Base Weld & Epox Repair billed at 1/4 hour $25. Our hourly rate is $100.

See the Montana tuner in action:

Looking or Bike Service as well, head over to our Bike service options.

1. Can I pick this item up at the Philbrick’s store?
Yes. All products can be ordered online and picked up at our Dover, NH store. Choose Local Pickup during checkout and we’ll notify you when your order is ready.

2. Do you assemble bikes purchased online?
Yes. Bikes purchased through Philbrick’s can be professionally assembled by our in-store technicians so they’re ready to ride when you pick them up.

3. Can I get help choosing the right size or model?
Absolutely. Our staff are experienced riders and can help you choose the correct size, fit, and model. Feel free to call or stop by the store for personalized guidance.

4. Do you offer bike fitting services?
Yes. We offer professional bike fitting services to help ensure comfort, performance, and injury prevention.

5. Can you service equipment purchased from your website?
Yes. Our service department can tune, repair, and maintain bikes and gear purchased from Philbrick’s.

6. How long does local pickup take?
Most orders are ready within 1–2 business days, depending on assembly or service requirements. We’ll email you as soon as your order is ready.

7. Can I return or exchange items at the store?
Yes. Online purchases from Philbrick’s can be returned or exchanged at our Dover, NH location in accordance with our return policy.

8. Do you carry products in the store that aren’t listed online?
No, all products are listed online.

9. Can I speak with someone before placing an order?
Of course. Our team is happy to answer questions about products, sizing, compatibility, or availability before you purchase. Call the store at your convenience. 603-742-9333

10. Where is Philbrick’s located?
Philbrick’s is located in Dover, New Hampshire, serving riders throughout the Seacoast region including Portsmouth, Hampton, and surrounding communities.